This tutorial demonstrates how to create a basic test configured project.  This project starts where the 0001 tutorial  left off and adds a new test called Flow Test to the existing project.  Within t he new test the video shows how to add instructions, errors, and test arrays.  The test arrays are a powerful three dimensional object array in which parameter and result objects are placed.  The tutorial runs the test using while using a physical DAQ board.

Setup Instructions:

This application used a National Instruments USB-6008 data acquisition board.  Note that any compatible board could be used as long as the DAQ board which is used is selected within the application’s tree view.

The application’s channel wiring was as follows:

• AI0 directly wired to AO0

Project built from: 0001